Finishing a Laminate Stock
You are Unregistered, please register to use all of the features of!    

Firearm & Gun Forum - > Gunsmithing & Do-It-Yourself Projects > Engraving & Refinishing >

Finishing a Laminate Stock

LinkBack Thread Tools Display Modes
Old 03-15-2011, 12:10 AM   #1
Feedback Score: 0 reviews
Join Date: Mar 2009
Posts: 71
Default Finishing a Laminate Stock

Just got my stock from Richards and cant wait to get started on finishing it, but I do not want to mess this thing up so Im asking some pointers etc on finishing a laminate stock. Seems some light sanding will be need, and when it comes time to seal it I wondering what to used with laminate. I do want to use a product that will slightly darken the finish.


oh and Im working close to a bass pro shop for the next couple days so ill be able to pick up some items that will be needed

Last edited by bessemerbob; 03-15-2011 at 12:17 AM.
bessemerbob is offline  
Reply With Quote

Join Today - It's Free!

Are you a firearms enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more.

Firearms Talk is owned and operated by fellow firearms enthusiasts. We strive to offer a non-commercial community to learn and share information.

Join Today! - Click Here

Old 03-15-2011, 02:03 AM   #2
Feedback Score: 0 reviews
JTJ's Avatar
Join Date: Oct 2010
Location: Lake Havasu,Arizona
Posts: 7,409
Liked 2966 Times on 1638 Posts
Likes Given: 832


You are lucky. The one I got from Boyds required major sanding. I used Tung Oil. Just follow directions.
Patron Member NRA
"I would not be an old man if I had not been an armed young man." JTJ
I was taught to respect my elders but they are getting harder to find.
JTJ is offline  
Reply With Quote
Old 03-16-2011, 12:06 AM   #3
Feedback Score: 0 reviews
Join Date: Mar 2009
Posts: 71

thanks for the heads up on tung oil, one thing that Im not sure about is after reading up on it the product can cause a bit of "yellowing". I do want to darken my laminate a bit with the finish so that may work.

Also just want to make sure there are no precautions when working with laminate vs solid wood?

Thanks again...
bessemerbob is offline  
Reply With Quote

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
Stock re-finishing on my Winchester 1917 Enfield. DarinCraft DIY Projects 7 02-24-2011 05:22 PM
Stocks...laminate vs wood redrover3569 General Shotgun Discussion 6 10-26-2010 09:17 PM
Hydro-Dip finishing Ruzai Engraving & Refinishing 1 08-08-2010 11:01 AM
Finishing up my winter project. Deadman1 Engraving & Refinishing 4 04-04-2010 02:02 PM

Newest Threads