Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Engraving & Refinishing (
-   -   cz p07 duty 9mm refinishing job need help? (

Minnesotalean 09-20-2012 02:26 AM

cz p07 duty 9mm refinishing job need help?
I want to take the paint off the barrel and chamber not sure how to go about it I.also need to Polish it after and would like to no exactly what you you guys use and where I can get it! if it goes well I would like to do a few parts on the slide and hammer as well


Minnesotalean 09-20-2012 02:27 AM

PS its my first time doing anything like this so the simplest ways would be best I have no experience with this sort of thing


TheOldMan 09-20-2012 10:38 AM

First things first... Your P07 does NOT have a painted surface. Most modern firearms sporting a matte finish like your P07 are a form of parkerizing. The only way to remove this finish is through media blasting. My suggestion would be to find a local gunsmith that also specializes in refinishing firearms and go from there. I'm assuming you want to remove the finish so you can have a polished bright finish rather than the matte finish you have now? Typical cost to have your P07 put the way you want it will cost about $100 TO $150 possibly less if you disassemble it yourself and send the parts that need finished to the shop doing the work.

GrtWhytHype 09-23-2012 06:30 AM

4 Attachment(s)
Forget that! Vinegar and a scotch bright pad will remove the finish. After that get some mother's mag polish and buff that sucker out. Clean rag or t shirt cut up and apply the polish, rub it in until you start to get black. Then take another clean rag and wipe it off. Do that in front of the tv for like an hour and it'll be nice and shiny! Just did it to the barrel on my lc9.

Attachment 60224


Attachment 60225


Attachment 60222


Attachment 60223


All times are GMT. The time now is 05:29 AM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.