Wts: Pof .308 Stripped Billet Lower Receivers, $449
Firearm & Gun Forum - FireArmsTalk.com > Sponsor Display > Sponsor Display > Wts: Pof .308 Stripped Billet Lower Receivers, $449

Reply
 
LinkBack Thread Tools Display Modes
Old 03-02-2009, 03:38 PM   #1
Feedback Score: 0 reviews
 
Join Date: Nov 2008
Posts: 50
Default Wts: Pof .308 Stripped Billet Lower Receivers, $449

Anchor Armament LLC
ANCHOR ARMAMENT LLC

POF-USA, PATRIOT ORDNANCE FACTORY

P-308 (Semi-Auto) Stripped Lower NP3 Finish

Stripped, semi-auto lower receiver is fully machined from U.S.-sourced 7075 T6 aluminum billet for superb strength and precise dimensions. Extra metal in the right places gives a big payoff in added support and rigidity with minimal extra weight. AR-style .308 accepts mil-spec and aftermarket accessories, so you can select the upper receiver, receiver extension, trigger group, pistol grip, and buttstock that best serve your needs -- the perfect foundation for a custom tactical rifle. Integral, oversized triggerguard, machined as part of the receiver, further enhances structural rigidity and provides plenty of clearance for trigger finger when wearing gloves. Radiused inside and outside edges protect finger from cuts and scrapes when mounting weapon quickly or during extended fire. Flared magwell with smoothly radiused inside corners helps ensure fast reloads, without fumbling, when seconds count. Cut for ambidextrous bolt release to allow strong- or weak-hand operation; right-side button included with receiver. Easy-to-see laser etched, international “fire” and “safe” symbols give the operator instant, intuitive feedback on the weapon’s safety status in high-stress situations. Mil-spec hardcoat anodized for additional surface strength and corrosion resistance before application of the hard, self-lubricating Teflon® outer coating that’s almost impervious to abrasion and scratches. All heat-treatment, plating, and coatings are applied by U.S.-owned and operated contractors.

SPECS: 7075 T6 aluminum, hardcoat anodized. Small-pin, .154” (3.9mm) hammer/trigger pin holes. .250” (6.3mm) pivot/takedown holes. Accepts AR-style .308/7.62mm upper receivers from Patriot Ordnance, DPMS, and Remington Arms. Uses standard small-pin AR-15 trigger, pistol grip, takedown pin, and receiver extension. Requires .308 buffer, buffer spring, pivot pin. Matte medium gray finish.

FFL required for purchase.

Only Ground shipping options available. No USPS shipping on this item.
__________________
AnchorArmament is offline  
 
Reply With Quote

Join FirearmsTalk.com Today - It's Free!

Are you a firearms enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more.

Firearms Talk is owned and operated by fellow firearms enthusiasts. We strive to offer a non-commercial community to learn and share information.

Join FirearmsTalk.com Today! - Click Here


Old 03-05-2009, 09:20 PM   #2
Feedback Score: 0 reviews
 
Join Date: Nov 2008
Posts: 50
Default

Still have a few in stock ready to ship.

__________________
AnchorArmament is offline  
 
Reply With Quote
Old 03-09-2009, 03:52 PM   #3
Feedback Score: 0 reviews
 
Join Date: Nov 2008
Posts: 50
Default

__________________
AnchorArmament is offline  
 
Reply With Quote
Old 03-11-2009, 09:42 PM   #4
Feedback Score: 0 reviews
 
Join Date: Nov 2008
Posts: 50
Default

I have 1 left.

__________________
AnchorArmament is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
CETME Receivers Obamardo General Rifle Discussion 1 05-10-2009 03:48 PM
WTS:POF P-415 GEN III Billet Stripped Lower $399ea AnchorArmament Sponsor Display 1 02-08-2009 01:48 PM
WTS: TKS AR15 Billet Lower Receivers $209.95 ea AnchorArmament Sponsor Display 0 01-09-2009 11:53 AM
Barreled Receivers ScottG General Rifle Discussion 2 08-11-2008 02:28 PM