Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Curio & Relic Discussion (http://www.firearmstalk.com/forums/f37/)
-   -   Where to buy a springfield? (http://www.firearmstalk.com/forums/f37/where-buy-springfield-59297/)

chase012798 03-03-2012 12:32 AM

Where to buy a springfield?
 
Where do I got a springfield?

JonM 03-03-2012 12:56 AM

a springfield what?? they made a lot of guns. ive got springfield armory m1 garand. ive got a remington made springfield 1903A3.

there are also springfield muzzle loaders trapdoor rifles modern semi auto pistols and M1A rifles...

c3shooter 03-03-2012 01:36 AM

I also have Springfield .22s and shotguns- it was a brand name used by Savage.

If YOU can be more specific, so can we.

Vikingdad 03-03-2012 01:51 AM

Firearms of all kinds have been made under the Springfield name since the American Revolution. You need to be more specific.

Tell_Sackett 03-03-2012 02:21 AM

Maybe he wants one of each?:rolleyes:

robocop10mm 03-03-2012 04:46 AM

Quote:

Originally Posted by Tell_Sackett (Post 727023)
Maybe he wants one of each?:rolleyes:

Now THAT sounds like a plan!!!

chase012798 03-03-2012 11:53 AM

Ya didn't mean that I had to go so I didn't put in every thing I'm looking for a Springfield m1903

JonM 03-03-2012 01:29 PM

Best sourceis the cmp if they have any left. Other than that its private sales. If you dont mind a reproduction made from rewelded demilled receivers and new barrels there is the gibbs rifles ones.

c3shooter 03-03-2012 08:21 PM

CMP does not have 03s, and states that they do not expect to ever have large numbers of them. There are several up for auction right now over at auctionarms.com.

PLEASE NOTE- a couple of those are "low number" rifles. I do not claim expertise on these, so folks that disagree, please do not argue with me- this is NOT my opinion, but advice from the CMP on low number Springfields- C&P from CMP website-

WARNING ON “LOW-NUMBER” SPRINGFIELDS

M1903 rifles made before February 1918 utilized receivers and bolts which were single heat-treated by a method that rendered some of them brittle and liable to fracture when fired, exposing the shooter to a risk of serious injury. It proved impossible to determine, without destructive testing, which receivers and bolts were so affected and therefore potentially dangerous.

To solve this problem, the Ordnance Department commenced double heat treatment of receivers and bolts. This was commenced at Springfield Armory at approximately serial number 800,000 and at Rock Island Arsenal at exactly serial number 285,507. All Springfields made after this change are commonly called “high number” rifles. Those Springfields made before this change are commonly called “low-number” rifles.

In view of the safety risk the Ordnance Department withdrew from active service all “low-number” Springfields. During WWII, however, the urgent need for rifles resulted in the rebuilding and reissuing of many “low-number” as well as “high-number” Springfields. The bolts from such rifles were often mixed during rebuilding, and did not necessarily remain with the original receiver.

Generally speaking, “low number” bolts can be distinguished from “high-number” bolts by the angle at which the bolt handle is bent down. All “low number” bolts have the bolt handle bent straight down, perpendicular to the axis of the bolt body. High number bolts have “swept-back” (or slightly rearward curved) bolt handles.

A few straight-bent bolts are of the double heat-treat type, but these are not easily identified, and until positively proved otherwise ANY straight-bent bolt should be assumed to be “low number”. All original swept-back bolts are definitely “high number”. In addition, any bolt marked “N.S.” (for nickel steel) can be safely regarded as “high number” if obtained directly from CMP (beware of re-marked fakes).

CMP DOES NOT RECOMMEND FIRING ANY SPRINGFIELD RIFLE WITH A ”LOW NUMBER” RECEIVER. Such rifles should be regarded as collector’s items, not “shooters”.

CMP ALSO DOES NOT RECOMMEND FIRING ANY SPRINGFIELD RIFLE, REGARDLESS OF SERIAL NUMBER, WITH A SINGLE HEAT-TREATed “LOW NUMBER” BOLT. SUCH BOLTS, WHILE HISTORICALLY CORRECT FOR DISPLAY WITH A RIFLE OF WWI OR EARLIER VINTAGE, MAY BE DANGEROUS TO USE FOR SHOOTING.

THE UNITED STATES ARMY GENERALLY DID NOT SERIALIZE BOLTS. DO NOT RELY ON ANY SERIAL NUMBER APPEARING ON A BOLT TO DETERMINE WHETHER SUCH BOLT IS “HIGH NUMBER” OR “LOW NUMBER”.

ScottG 03-05-2012 12:37 PM

Look on auction sites and gun shows. Expect to pay quite a bit for a good one.


All times are GMT. The time now is 06:17 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.