I bought a sight base and made a rail that fit down inside where the Iron sight fit. I then drilled the sight base and rail and pinned them together and slid it back on to the dovetail and pinned so it can't possibly move. Some of the bases are silver soldered on to the dovetail so after removing the pins you'll have to heat the base to melt the solder and then drift the base off the dovetail with a brass drift. Sometimes the pins holding the base on are also soldered and need to be heated to be removed. Mine holds zero very well as long as the scope holds up. There is no need to resolder if everything fits snugly.
"War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling, which thinks nothing is worth war, is worse. A man who has nothing which he cares more about than his own personal safety is a miserable creature, and has no chance of being free unless he is made free and kept so by the exertions of better men than himself" John Stuart Mill
A government which robs Peter to pay Paul can always depend on the support of
Last edited by dteed4094; 01-28-2014 at 04:42 PM.