Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Curio & Relic Discussion (
-   -   Jungle carbine (

Nfernaays 07-26-2012 02:00 AM

Jungle carbine
Im getting my enfield no 5 jungle carbine to working order but am having difficulty with the small spring loaded retaining "pin" or "stopper" that stops the bolt from going back...if i'm super gentle w it the bolt will move back forward if the bolt is racked it will catch...not sure what problem is...stopper does come off rifle when pulled up...not sure what to do replace other problem? Any suggestions wld be great

mountainman13 07-26-2012 02:15 AM

Can you post some pics? I'm not sure what you're talking about.

TheOldMan 07-27-2012 12:36 PM


Originally Posted by mountainman13 (Post 882073)
Can you post some pics? I'm not sure what you're talking about.

Yes.. Pictures please. I think I know what you're talking about but pictures will help us give ideas on what might be happening.. If it's parts that you need, try searching at Numrich's

Nfernaays 07-27-2012 01:16 PM

Yes ill put some up later today i have looked at numrich but i think it will be helpful to know what part to replace ill get those pics up soon guys thanks

Nfernaays 07-28-2012 12:31 AM

2 Attachment(s)
Attachment 52641

Attachment 52644

Nfernaays 07-28-2012 12:32 AM

First pic shows pin in second with it removed

mountainman13 07-28-2012 12:38 AM

Can you get the bolt in and out?

Nfernaays 07-28-2012 12:45 AM

Yes it can pull totally out by rotating the bolt head once past a point problem is when you pull it back it catches that pin thing and wont go back forward without depressing pin

mountainman13 07-28-2012 12:49 AM

Do you have to depress that piece to put the bolt back in or can you just rotate the bolt head down into position?

Nfernaays 07-28-2012 12:55 AM

When i pull ot back it catches then i dont need to depress it at all it just rotates...the pin doesnt stop bolt as should

All times are GMT. The time now is 09:32 AM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.