Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Curio & Relic Discussion (http://www.firearmstalk.com/forums/f37/)
-   -   1916 spanish mauser short rifle (http://www.firearmstalk.com/forums/f37/1916-spanish-mauser-short-rifle-91516/)

angryhart 05-31-2013 01:54 AM

1916 spanish mauser short rifle
 
Anyone familiar with the 1916 short rifle accuracy wise? Just finished a restoration of one in 7x57 mauser. Reblued and refinished. Ironed out the dents. I put a lot of work into it. Just wondering what others experiences with one of these has been.

enfieldaddict 01-15-2014 06:56 AM

Ik this is an old thread but since I'm the pony reply I hope its ok I bought one and I love it its one of the best mausers out there IMOHO

enfieldaddict 01-15-2014 08:08 AM

My accuracy with mine is fantastic

kfox75 01-15-2014 07:18 PM

Picked mine up several years ago. It will shot minute of deer at 100+ yards all day long. On target, I can get about a 2 inch group at 100 yards with the battle sights on a good day.

enfieldaddict 01-15-2014 07:46 PM

I need a couple parts for mine

xring3 01-15-2014 09:53 PM

I have one in .308 that I need to restore. I think Samco still has some

enfieldaddict 01-15-2014 09:54 PM

Numrich has what what i need just got to wait till payday

angryhart 01-16-2014 10:50 AM

When I got it mine needed parts too. Mag spring, sight protector, firing pin spring, and the extractor was nicked up, and the feed ramp liked to grab the tip of the bullet and misfeed.
Got the springs from wolf gun springs. I just buffed the extractor and after some careful dremel work the feed ramp has no issues. I put maybe 50 rds thru it and it was 1/2 inch right at about 85 yds after drifting the front sight.

angryhart 01-16-2014 11:34 AM

1 Attachment(s)
Attachment 133260
Not the best of pics but it's ok

angryhart 01-17-2014 11:44 AM

I heard the .308 ones were a mixed bag. Some are awesome some are terrible. I was tempted to get one in .308 but I had heard that there was a possibility of receivers not handling the pressures.


All times are GMT. The time now is 07:52 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.