Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   DIY Projects (http://www.firearmstalk.com/forums/f35/)
-   -   Work bench and vice, small DIY? (http://www.firearmstalk.com/forums/f35/work-bench-vice-small-diy-47044/)

rccalzadilla 08-18-2011 05:38 PM

Work bench and vice, small DIY?
 
I need a temporary work bench and vice to assemble my first AR15 M4.
My single car garage is already partitioned half gym half tools and large tool box.
Any idea on which would be the smallest bench vice to accomplish the above?

7.62 Man 08-18-2011 09:20 PM

A bench vice is not a real necessity when assembling an AR, it can be done without one. But a good clean work bench is a must.
Cause the little springs & things will get lost if you don't watch for them real close.:eek:

rccalzadilla 08-18-2011 10:27 PM

thanks for reply.

canebrake 08-18-2011 10:36 PM

1 Attachment(s)
This is all you need.

Plastix Plus AR-15 Gun Maintenance Center with Lip Edge Plastic Black - MidwayUSA

Gatoragn 08-18-2011 10:39 PM

Quote:

Originally Posted by rccalzadilla (Post 565567)
I need a temporary work bench and vice to assemble my first AR15 M4.
My single car garage is already partitioned half gym half tools and large tool box.
Any idea on which would be the smallest bench vice to accomplish the above?

I use one of the small clamp on vices and have changed a foreend and to hold the plastic lower block.

rccalzadilla 08-18-2011 11:18 PM

Quote:

Originally Posted by canebrake (Post 565680)

Like it, ordered it!
thanks

canebrake 08-18-2011 11:28 PM

Quote:

Originally Posted by rccalzadilla (Post 565709)
Like it, ordered it!
thanks

I've had mine for about two years. It ain't fancy but it works great.

I have a Tipton Best Gun Vise but when it comes to ARs, the Plastix comes out!

http://i1196.photobucket.com/albums/.../tiptonbgv.jpg

rccalzadilla 08-21-2011 08:37 PM

Quote:

Originally Posted by canebrake (Post 565680)

Is this jig enough for torquing the barrel and but stock castle nut?

rccalzadilla 08-22-2011 01:18 PM

Quote:

Originally Posted by canebrake (Post 565680)

So I can use this jig to torque barrel and buffer castle nut?
tks


All times are GMT. The time now is 03:47 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.