Firearm & Gun Forum -

Firearm & Gun Forum - (
-   DIY Projects (
-   -   Ruger P90 (

chasle90 03-31-2012 06:08 PM

Ruger P90
1 Attachment(s)
I've got a p90 that I've never been able to find attachments for or any custimizations for it cause they say its good the way it is. I disagree that a light or laser attachment would look awesome on the bottom of the gun infront of the trigger. Anyone ever customized there own to do so?

Attachment 42770

raceroch 05-17-2012 05:13 AM

If you can't figure out a solution I will buy it from you :)

GrtWhytHype 09-14-2012 04:24 PM

I have a p944 that I picked up as a fixer-upper. Currently in the process of mirror polishing the slide as well as some of the internals. Outside of the hogue rubber grips, I've run into the same issue. You can switch out sights but that's about it. As a side note I actually have an extra set of hogue's that I'd be willing to give you. Send a pm if you're interested.

I've heard and seen some picatinny rails that can be drilled into the frame for light/laser mounting but that's not something I'd ever be interested in. The other things I've considered is getting a red dot mount instead of the rear sights and extending the magwell. Pick up a couple 20 round mags and you have yourself a kick ass range gun! Lol. Will update as the project progresses.

rodent.22 09-16-2012 08:55 AM

I've seen clamp-on red dots for the trigger guards. Don't know about the quality....

rugerry 09-16-2012 10:33 PM

6 Attachment(s)
Hey guys, I have a P89DC. Inherited it from my grandfather so selling to buy a handgun with a rail.... wasn't in my book. I researched for months. Found many trigger guard lasers that looked ugly. I found magnetic mounts specifically for my p89 and I found rail that mounted on the lower and wrapped to allow an optic to be mounted. All of these were ugly and not cheap. So here's what I did.... get yourself a standard 1913 rail, I believe mine is 1.5 inches long. Center the rail to where you want it mart your holes. Drill and tap. Use screws that came with rail. Be sure to use locktite. After it is mounted file the inside so the barrel ring does not bind. Being that that area of the lower is not parallel to the lower, you will need washers to shim the rail level.

Attachment 59047

Attachment 59042

Attachment 59043

Attachment 59044

Attachment 59046

All times are GMT. The time now is 07:24 PM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.