Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   DIY Projects (http://www.firearmstalk.com/forums/f35/)
-   -   raven 25 auto rebuild (http://www.firearmstalk.com/forums/f35/raven-25-auto-rebuild-81738/)

brokengunguy 01-18-2013 06:23 PM

raven 25 auto rebuild
 
So I'm rebuilding my raven25
And the I can't find the gun parts any where but gun broker.
Its only $40 bucks
Any know a better place for a parts kit I'm not a fan of gun broker.

brokengunguy 01-18-2013 06:49 PM

1 Attachment(s)
I need everything but the slide
And I need grips or grip templates.

Attachment 80385

hiwall 01-18-2013 07:35 PM

The frame is the main part. And the only part that has to go thru a FFL.

danf_fl 01-19-2013 12:21 AM

For the price, this may be better:
http://jimenezarmsinc.com/25cal.htm

c3shooter 01-19-2013 12:46 AM

First, if what you HAVE is what is in the photo, you are not rebuilding a gun, but BUILDING a gun. The receiver (frame) is, by law, the gun. Everything else is parts. To buy a reciever, you will need to do the same things you would need to do to buy a complete pistol.

Here is a schematic that shows the parts. By the time you get them, pay a FFL to handle transferring the frame, I will bet you a beer you will have a LOT more $$$ in that than it would cost you to buy a COMPLETE working Raven.

http://www.gunpartscorp.com/Manufacturers/RavenArms-33451/MP25-37865.htm?results=All

brokengunguy 01-19-2013 06:18 AM

1 Attachment(s)
I already have frame with trigger
And slide with ejector. So no FFL
For shipping just need the rest of internal parts.

Attachment 80443

brokengunguy 01-19-2013 06:32 AM

So really only parts i needed are
1 Recoil Spring
1 firing pin spring
1 Firring pin
1 retainer
1 safety switch
Grips or grip template
And magazine
And 2 other parts that have sloped my mind.
I have all the pins

DrumJunkie 01-19-2013 06:45 AM

Numrich might have them. Though I'm not sure why you want to rebuild this particular pistol. But, truth be told I don't have to understand it.

Click HERE That should get you started.

brokengunguy 01-19-2013 07:42 AM

Quote:

Originally Posted by DrumJunkie (Post 1100331)
Numrich might have them. Though I'm not sure why you want to rebuild this particular pistol. But, truth be told I don't have to understand it.

Click HERE That should get you started.

Well Honestly boredom and I love guns. all guns are fun and it wont cost much.

danf_fl 01-19-2013 09:00 AM

Quote:

Originally Posted by brokengunguy (Post 1099370)
I need everything but the slide
And I need grips or grip templates.

Quote:

Originally Posted by brokengunguy (Post 1100325)
So really only parts i needed are
1 Recoil Spring
1 firing pin spring
1 Firring pin
1 retainer
1 safety switch
Grips or grip template
And magazine
And 2 other parts that have sloped my mind.
I have all the pins

You had me confused there. I though you needed the frame also. What you don't have for small parts could probably be picked up in a hardware store. The grips could be made or extensive internet search.


All times are GMT. The time now is 10:58 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.