Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   DIY Projects (http://www.firearmstalk.com/forums/f35/)
-   -   old double barrel restore (http://www.firearmstalk.com/forums/f35/old-double-barrel-restore-60124/)

lilrichthedragon 03-13-2012 02:43 AM

old double barrel restore
 
I have my dads old double crack barrel 12ga shotgun and there is a deep crack in the stock any ideas on what to do also I don't have an ejector pin

tonydewar 03-13-2012 03:23 AM

little more info and pics?

danf_fl 03-13-2012 10:12 AM

Some of those old, fine, SXS shotguns should not be restored. If you can fix the stock or replace it, then go ahead.
The barrels may not be so lucky. If Damascus, it is not safe to shoot or try to repair.

Make it look good and put it on display some where.

mountainman13 03-14-2012 01:13 PM

Need pics before we can give repair advise

lilrichthedragon 03-15-2012 02:09 AM

ok will have some by this weekend

lilrichthedragon 03-16-2012 12:07 AM

here they are

mountainman13 03-16-2012 12:09 AM

You might want to try that again.

lilrichthedragon 03-16-2012 12:11 AM

2 Attachment(s)
photos of shotgun

lilrichthedragon 03-16-2012 12:15 AM

more photos

mountainman13 03-16-2012 12:16 AM

Unfortunately can't see that crack. Is it in the wrist? If its not too bad you can fill the crack with epoxy resin like is used in rifle bedding and clamp it back together. If its really bad you may want to cut it off at the crack ,clean up both sides ,drill a centered hole and insert a steel rod and then epoxy back together.


All times are GMT. The time now is 06:32 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.