I was joking about the 20,000. It only took about 1,100 hours but that's just because it's my first scratch build (I built an amd-65 from a parts kit and a bolt Action 50 from a manual), and didn't know the tricks I could make another one in any calibre in about 25- 75 hours because I learned from my mistakes : ) if anyone is serious about me building them one I have no problem with it at all, but this is a touchy thing and before i promise anything ill have to contact the ATF. I now have access to a CNC machine so I could do an even more proffesional job. Please contact me at email@example.com
and I'll give you my phone #. I can make every part for you except the reciever as that's what the ATF considers the weapon, but I can sent you a 80% done reciever with all the hole center punched, and all you need to do is drill the holes.
The mags are 32 round Uzi mags
This was electro etched (salt water) then cleaned up with my graver. That's why u see all the pitting
This is raised instead of sunk, I used a micro dremel to remove material.
Here's some more practice engraving inlaid with fake gold (a euphamism for spray painted then sanded : D)
Complete schematic hand drawn page one
Bottom view without rear grip those bolts attaché the lower reciever to the upper and holds the rail in place
View of the trigger mec
rear plate with my signature engraved