Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   DIY Projects (http://www.firearmstalk.com/forums/f35/)
-   -   Muzzle Break (http://www.firearmstalk.com/forums/f35/muzzle-break-84456/)

jeepboy4life 02-17-2013 05:05 PM

Muzzle Break
 
Okay so i live in New York so i cant have threaded barrels but i want a muzzle break. I am a CAD designer so i could design and build my own muzzle break and is what i plan on doing. my question is once i make my muzzle break, what would be the best way to attach it to my muzzle? this will be on a savage model 11 btw. thanks in advanced

c3shooter 02-17-2013 05:43 PM

Possibly pin it in place with a pair of cross pins, or silver solder it.

762 02-17-2013 06:10 PM

badger ordnance makes this one, i like it. says "front towards enemy"
http://www.triadtactical.com/images/T/306-38.jpg

then there's a few that look like this.
https://encrypted-tbn0.gstatic.com/i...uE8g5L3b8WbjZn

the ones that are out there are generally for rifles with heavy or varmint barrels, so making it will most likely be your best bet

unioncreek 02-17-2013 07:03 PM

I would turn a short section of barrel so the sides are parallel, unless you can buy a brake that will fit the barrel taper. I would use a set screw or clamping action like the ones shown.

Bob


All times are GMT. The time now is 11:21 PM.

Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.