Another pin and weld question
When I pin and weld a brake on and ar does the pin need to be on the top or can it be on the bottom of the barrel?
heres a little trick drill the hole where the pin will stick out on top then you can use the pin as the filler metal either by tig welding or oxy acetylene welding. fuse the pin to the brake and get off of it
make sure to use a heat sink on the inside of the barrel and use a wet towel to rest the brake on to use as a heat sink for the brake with the pin facing up so uou have a good position to fuse the join, a wet barrel mop will work.
file the weld flush after allowing to cool
|All times are GMT. The time now is 01:08 PM.|
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.