Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   Winchester Parts Restoration Model 94 (http://www.firearmstalk.com/forums/f33/winchester-parts-restoration-model-94-a-3195/)

gutterboy2ca 02-04-2008 02:38 PM

Winchester Parts Restoration Model 94
 
Hello guys, new to the forum as you can tell,first post, after looking for hours on the net i came upon this forum.I would love some input on whether or not to put my Grandfathers Rifle back to its original form, or leave it alone as for Collectors value.For some reason i assumed it would be easy to find a full lenth 30" original magazine tube and Barrel Ring,as he had this cut back when he was a Guide in 1918,and found it too heavy to carry.This is what i see missing from what i can tell.
Magazine tube cut back 6 inches
Barrel ring missing
Rear site elevater missing

any help on this would be great,like to restore and give it to my son,i still hunt with this Rifle as to date,works awsome,has won many Target shooting contests.
Rifle is a Model 1894 30WCF Octagon Nickle Barrel, Factory Rear Leimans Peep
Serial#174975

Catfish 02-04-2008 05:23 PM

If it works why fix it. If you plan to pass it down in the family and your grandfather had it modified I would personally what to pass it down that way. The story of why he had it done will also go with the gun and have alittle more meaning to each ganeration. Just my oppenion.

jeepcreep927 03-12-2008 05:21 AM

You might check www.gunpartscorp.com/ if you haven't already. If you don't have any luck, brownells might sell "blank" mag tubes that you can cut and fit. Good luck.

donmarkey 05-07-2008 11:19 PM

Contact Jim Wisner, he should have everything you need. http://www.wisnersinc.com/rifles/winchester/94.html
-Don


All times are GMT. The time now is 08:17 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.