Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Gunsmithing Forum (
-   -   vz58 Stock (non) removal (

ProfBri 06-09-2013 06:12 AM

vz58 Stock (non) removal
I can NOT get the stock bolt loose. My longest biggest screwdriver will fit in the slot if I force it inside the stock itself, and it locks in, but I just can not get it to turn in the slightest. It is just so frustrating :mad:. I applied some oil and let that sit for a few hours, nothing! :confused:

Any clever ideas? I would really appreciate it.

SSGN_Doc 06-09-2013 03:12 PM

If you could fit it in a freezer, it will often cause screws to loosen,

Kroil penetrating oil, or automatic transmission fluid can find their way into places over time.

primer1 06-19-2013 01:28 AM

Kroil and sunshine/ warmth to get it to creep better. Then cool it.

Does your screwdriver have a square or round body? If its square, put a combination or crescent wrench on it for added torque while putting weight on the screwdriver. If its round try some visegrips.

All times are GMT. The time now is 01:54 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.