Quote:
Originally Posted by Thatmoonshiner
I want to remove the entire fron sight so i can slide the bayonet lug off, but is the front sight mount also soldered on?
|
Don't think so...but it may be pinned or staked.
Quote:
|
The front sight base is a long sleeve which also incorporates the folding bayonet lug and is held in place with two pins, one at the rear of the sight base itself and one vertically at the bayonet lug. The forward section of the barrel is smaller in diameter forming a shoulder at the rear of the sleeve. The post and globe is the same type as the later wide Soviet assembly.
|
http://7.62x54r.net/MosinID/MosinM44EEC.htm
__________________
"The whole of the Bill (of Rights) is a declaration of the right of the people at large or considered as individuals.... It establishes some rights of the individual as unalienable and which consequently, no majority has a right to deprive them of." (Albert Gallatin of the New York Historical Society, October 7, 1789)
"A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." - George Washington
|
Type 53 nagant front sight removal
Linear Mode
