[Strikingeagle]

Does any member know how to lower the trigger pull on Colt Diamond back

Striking Eagle

[danf_fl]

Care must be taken not to reduce the hammer too much that misfires occur.

One way is to replace the internal springs (it probably needs that anyways).

There should be reduced power springs available. I do not encourage cutting springs.

[Strikingeagle]

Hi dang

Thanks for the in put I have done this on other revolvers but can not find any part for the Colt Diamond back that would reduce tigger pull or action wolf do not sell any spring kits for the Diamond Back do you know who does

Eagle

[danf_fl]

This may set you in the right direction:
http://www.coltparts.com/pt_D_framediamondback.html

[Nighthawk63]

Originally Posted by danf_fl

Care must be taken not to reduce the hammer too much that misfires occur.

One way is to replace the internal springs (it probably needs that anyways).

There should be reduced power springs available. I do not encourage cutting springs.

Do not cut springs. There are different spring tensions that you can purchase for a small amount.

[St8LineGunsmith]

ya a two pound spring is available through Midway USA or Brownells as well as a number of other on line gun parts vendors.