Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   Scope base screw hole spacing. (http://www.firearmstalk.com/forums/f33/scope-base-screw-hole-spacing-94235/)

davemccarthy707 07-22-2013 02:23 AM

Scope base screw hole spacing.
 
I have a Whitworth 30-06 built on a P-17 action. I have a rough idea on the mount it needs ( a redfield or Leupold type 3 hole mount). However it is not listed anywhere. Next problem is I only have a machinist ruler to measure the screw hole spacing. The spacing is approx .880 1st screw to 2nd screw, and just under 5 inches from 1st to 3rd hole (about 4.98 inches). Any help would be greatly appreciated ( I would bring it to the gunsmith but its a 6 hour round trip)

masterPsmith 07-25-2013 06:38 PM

1 Attachment(s)
Here are the measurements for the Tasco Base Mount that I have in my parts bin.

Jim..............

davemccarthy707 07-27-2013 02:20 PM

Quote:

Originally Posted by masterPsmith (Post 1315107)
Here are the measurements for the Tasco Base Mount that I have in my parts bin.

Jim..............

Thanks! Greatly appreciated.


All times are GMT. The time now is 02:17 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.