Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   Savage mod 340e 22 (http://www.firearmstalk.com/forums/f33/savage-mod-340e-22-a-62345/)

CallahanArms 04-12-2012 02:58 AM

Savage mod 340e 22
 
I was given this gun by a friend because he could not get the bolt out of it... Well i have taken it apart down to the barrel and receiver being left to disassemble... Still no luck getting the bold out... It only comes up from the locked in position maybe a half inch... Not letting the bolt handle to reach the upward position.. Any advice?

danf_fl 04-12-2012 10:39 AM

Stop by our "introductions" area.

Welcome to the FTF.

Got pictures?

CallahanArms 04-13-2012 10:19 AM

The picture doesn't show the explanation...it is missing a gas shield and i think if i remove the barrel it might help

CallahanArms 04-13-2012 10:22 AM

1 Attachment(s)
Here it is

Attachment 43579

bearrwe 04-13-2012 10:29 AM

Have you tried removing the trigger assembly?

danf_fl 04-13-2012 10:57 AM

Removing the barrel will show you the end of the bolt and not much else.
The suggestion to remove the trigger assembly is the best so far.
Because the trigger assembly allows the firing pin to release, it is connected somehow to the bolt. If the trigger is messed up, then the bolt may have interference in moving.


All times are GMT. The time now is 07:28 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.