Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   Savage 93R17 BTVS action (http://www.firearmstalk.com/forums/f33/savage-93r17-btvs-action-38091/)

workinprogress 02-07-2011 05:40 PM

Savage 93R17 BTVS action
 
Just got this for Christmas and fired it a few times. What I'm realizing is that the action isn't as smooth as I'd like it to be. It has gotten smoother with cleaning and may get smoother over time so this thread could be moot. But what I was wondering was is there something I could do myself to make it smoother or is this typically a gunsmith only process?

Any suggestions would be great and if I should just leave it alone that is what I'll do, thanks in advance.

stalkingbear 02-07-2011 06:08 PM

The best way to smooth up the action is to put lapping compound on your bolt and work it a couple thousand times. I'd use FINE lapping compound and be SURE to remove ALL of the lapping compound when you're done. You'll have to recoat the contact areas several times while doing it.

http://www.brownells.com/.aspx/pid=1137/Product/LAPPING_COMPOUNDS

workinprogress 02-07-2011 06:51 PM

This sounds fairly straightforward and simple process but I want to check a few things before I do it myself. Do I just brush a little on the bolt and then once I see it is wearing off reapply? What cleaning agent should I use to get rid of all of the lapping compound? Once I'm done do I just use a normal gun oil on the parts? This process almost seems too simple and is why I'm asking so many questions.:o Thanks again.

stalkingbear 02-07-2011 08:45 PM

If you use the lapping compound I showed you in the link, it's water soluble-that means it washes away with soap & warm water. You apply a light coat of lapping compound to the bolt and reapply when you feel it "go away". I was only 1/2 joking when I said a couple thousand times, be advised it WILL take several hundred cycles to do the job.

rifleman55 02-08-2011 05:01 AM

Polish the bolt on the flats and on top of the rib with a stone, just don't get carried away, a little lapping might be OK, but realize it's easy to open things up too much.
The Savage is a production rifle not a custom one, it will smooth up on it's own with some use. Don't expect it to be as smooth as a rifle costing far more, just be glad they shoot like they have eyes.

John K

workinprogress 02-08-2011 01:25 PM

Thanks for the help guys, I think I'll be staying away from the stone though. All I'm looking to get rid of is the difficult push that it has and I think the lapping compound will take care of that. I've got 500 rounds heading to the house right now so I can really start breaking this baby in.:D

rifleman55 02-10-2011 03:57 AM

Shoot it for a while and look for the spots where the bluing is wearing, those are the spots worth going after.

John K

workinprogress 02-10-2011 03:54 PM

This one is a stainless steel big baby but I'll keep an eye out for wear paterns from here on out.


All times are GMT. The time now is 11:29 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.