Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   Savage 22 - 410 Selector repair (http://www.firearmstalk.com/forums/f33/savage-22-410-selector-repair-23422/)

kat999 02-15-2010 03:01 AM

Savage 22 - 410 Selector repair
 
Can anyone tell me what is most likely the problem / part needed for a 1949 Stevens Savage 22 - 410 barrel selector switch? Also where can I get schematic for parts and assembly? Thanks

red ryder 02-15-2010 03:03 AM

not sure how to answer your question.

just wondering how your's is chambered. I have one in .22Mag and 3" .410 and wondering how common that is.

almost all of them I see are in .22LR.

Esteban 02-15-2010 02:15 PM

I haven't seen one of those in quite awhile & had forgotten about them. I'd like to have one. 22/410,,, or 22/20ga.

Scroll down on this website page & you will find a selector , making sure of your model #.

Savage Shotgun Parts, Stevens Shotgun Parts,Springfield Shotgun Parts, Original Obsolete Stevens Shotgun Parts. Stevens Autsomatic Shotgun Parts, Stevens Pump Shotgun Parts, Stevens Single Barrel Shoptgun Parts, Stevens Shotgun Barrels, Stevens Doubl

stalkingbear 02-15-2010 03:23 PM

There were 2 types of selectors, 1s like yours (side mounted) and hammer mounted selector. Try gunpartscorp and if they don't have your selector you can convert it to a hammer mounted selector. The older type selector was a lot more problem/breakage prone than the foolproof hammer mounted variety.
www.gunpartscorp.com

kat999 02-20-2010 01:45 AM

22 - 410 Savage
 
Quote:

Originally Posted by red ryder (Post 230591)
not sure how to answer your question.

just wondering how your's is chambered. I have one in .22Mag and 3" .410 and wondering how common that is.

almost all of them I see are in .22LR.

My brother has a newer model Savage his is a 22 mag over 20 gauge mine was made in 1949 { best I can figure from mark on side } and is a 22 LR over 410. I used one just like it when I was a kid and really liked it. This one was given to me recently from an elderly Uncle from who I found out had loaned to his brother in law { who kept it for about 20 years } this is the same gun I used { unknown to me at the time } when I was a kid. Funny how things work out in the end sometimes. Anyway I think for what the gun is made for you cant beat it for squirrel or rabbits.

kat999 02-20-2010 01:49 AM

22 - 410 Savage
 
Quote:

Originally Posted by Esteban (Post 230754)
I haven't seen one of those in quite awhile & had forgotten about them. I'd like to have one. 22/410,,, or 22/20ga.

Scroll down on this website page & you will find a selector , making sure of your model #.

Savage Shotgun Parts, Stevens Shotgun Parts,Springfield Shotgun Parts, Original Obsolete Stevens Shotgun Parts. Stevens Autsomatic Shotgun Parts, Stevens Pump Shotgun Parts, Stevens Single Barrel Shoptgun Parts, Stevens Shotgun Barrels, Stevens Doubl

I will check for the parts. I hope they have a schematic to look at as I will need it. Thanks

kat999 02-20-2010 01:53 AM

22 - 410 Savage
 
Quote:

Originally Posted by stalkingbear (Post 230783)
There were 2 types of selectors, 1s like yours (side mounted) and hammer mounted selector. Try gunpartscorp and if they don't have your selector you can convert it to a hammer mounted selector. The older type selector was a lot more problem/breakage prone than the foolproof hammer mounted variety.
www.gunpartscorp.com

I hope to keep same safety. I know it is not a valuable gun but just hate to change it. Thanks


All times are GMT. The time now is 02:22 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.