Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   S&W Model 29 firing pin help (http://www.firearmstalk.com/forums/f33/s-w-model-29-firing-pin-help-102154/)

widowmaker 12-30-2013 05:06 PM

S&W Model 29 firing pin help
 
I have beautiful mint condition Mod. 29 but the firing pin and spring were gone when I got it.
I have the parts now but evidently I need a special tool to push the retaining pin into the hammer and firing pin.
Anyone know where I can find one?
Thanks

danf_fl 01-04-2014 10:16 AM

Give me a pic to see which S&W hammer.

Sometimes, one can use a tie wrap, and a regular punch.

Or is the firing pin mounted in the frame?

widowmaker 01-04-2014 05:00 PM

the firing pin is mounted in a slot in the hammer itself.
I just didnt want to damage anything by driving it in. Is there a special tool to install the roll pin that hold the firing pin in the hammer?

danf_fl 01-05-2014 11:05 AM

Have you tried to align the firing pin and spring with a punch from the starboard side, start the retaining pin from port and use retaining pin to push out the first punch?

It can be done with regular punches purchased at a local hardware store if you are careful not to mark the hammer of the gun and use wood or plastic to absorb hits.

Hookeye 01-13-2014 01:19 AM

Better yet, buy a bench block.

robocop10mm 01-13-2014 01:48 PM

Stake with a center punch.

It is called a rivet to retain the hammer nose


All times are GMT. The time now is 02:16 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.