Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Gunsmithing Forum (
-   -   Ruger GP100 modification (

Yonaledi 12-20-2010 08:25 PM

Ruger GP100 modification
I have a GP100 4" stainless with a spurless hammer I want to change to double action spur hammer and reduce the trigger pull. Is this possible to do myself or do I need to send it to Ruger?

stalkingbear 12-20-2010 10:45 PM

If you are mechanically inclined you should be able to do it yourself. Finding a hammer might be a bit of a problem however. You can install a Wolff spring kit that will reduce the DA trigger pull by 30-40%. Would you still need to change the hammer over to a spur hammer if the felt trigger pull was reduced by 40%? Check Brownells, Midway, Ruger, and Gun parts corp for a hammer, and midway or Brownells for the spring kit.

World's Largest Supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools - BROWNELLS

Shop Shooting Supplies | Reloading | Gunsmithing | Hunting gear — MidwayUSA

Numrich Gun Parts Corporation

All times are GMT. The time now is 11:55 AM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.