[mtmagwhenindout]

Was doing a trigger job but I did not see this came from can anyone help

[hmh]

On the trigger guard behind the trigger small hole with a spring then the plunger that touches the trigger it is the plunger.

[mtmagwhenindout]

The pin at the top holds the trigger and black thing together with spring in it so it don't go there

[mtmagwhenindout]

The trigger reset is here

[mtmagwhenindout]

Originally Posted by hmh

On the trigger guard behind the trigger small hole with a spring then the plunger that touches the trigger it is the plunger.

The trigger reset I have that part?

[hmh]

Does this help any

[vincent]

See if you can find any info here...looks like the sear pin that holds it all together...

<Your New ruger 10/22>

[hmh]

This if it doesn't let me know and I will pull my trigger

[mtmagwhenindout]

Originally Posted by hmh

This if it doesn't let me know and I will pull my trigger

<img src="http://www.firearmstalk.com/forums/attachment.php?attachmentid=36158"/>

According to picture it looks like 31 which is something to do with safety but I didn't mess with safety is it possible it come out of thee also I can't tell what goes in 41

[mtmagwhenindout]

Ok fellows I got to go to bed I put it all back together with the hammer, auto bolt release, magazine lever and all the springs that came in the valquartsen probably didn't spell that right trigger kit all pin are in place where they should tested the trigger, safety and bolt release and everything seems to be working like a champ but I still don't know where that part went it looks according to pictures y'all sent me it goes behind the trigger but I don't have a hole there for it I'm stumped