remington model 7600
You are Unregistered, please register to use all of the features of!    

Firearm & Gun Forum - > Gunsmithing & Do-It-Yourself Projects > Gunsmithing Forum >

remington model 7600

LinkBack Thread Tools Display Modes
Old 12-05-2012, 04:44 PM   #1
Feedback Score: 0 reviews
Join Date: Dec 2012
Posts: 3
Default remington model 7600

what retains the large(outside) cam pin into the bolt/bolt carrier of a model 7600 pump rifle? thanks
Sorry Duplicate

m1shooter is offline  
Reply With Quote

Join Today - It's Free!

Are you a firearms enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more.

Firearms Talk is owned and operated by fellow firearms enthusiasts. We strive to offer a non-commercial community to learn and share information.

Join Today! - Click Here

Old 12-09-2012, 10:42 PM   #2
Supporting Member
Feedback Score: 0 reviews
Sniper03's Avatar
Join Date: Jun 2010
Location: Tennessee
Posts: 6,427
Liked 3910 Times on 1887 Posts
Likes Given: 1963



There is a large pin on either side of the carrier that must be removed. Then remove the small pin in the rear that retains the firing pin. Then the bolt can be taken apart and pulled completely out. Do not loose the spacer ring or the firing pin spring. There is also a Gunsmith Video on YouTube somewhere with a guy doing exactly that on the 7600. I saw it a while back while I was doing some research regarding my Remington 740 Semi Auto.

The Constitution is not an instrument for the Government to restrain the people. It is an instrument for the people to restrain the Government!
*Patrick Henry

Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom."

-- John F. Kennedy
Sniper03 is offline  
Reply With Quote
Old 12-27-2012, 03:00 AM   #3
Feedback Score: 0 reviews
Join Date: Nov 2008
Posts: 5
Liked 1 Times on 1 Posts


If you are asking what keeps the pin from falling out it is the Ejector Port Cover, usually made out of plastic.

Aderondacker is offline  
Reply With Quote

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
Remington rifle Model 7600 m1shooter Gunsmithing Forum 4 12-27-2012 01:12 PM
Remington 7600 any good? Davey_boi General Rifle Discussion 15 09-25-2012 02:28 AM
Opinions of the Remington 7600 MP1000 General Rifle Discussion 12 11-06-2009 11:23 PM
Remington 760 and 7600 dragunovsks General Rifle Discussion 13 04-21-2009 05:46 AM
Pre 1980's Remington Model 7600 Hard2Shoot General Rifle Discussion 2 11-02-2008 01:34 AM

Newest Threads