Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   remington model 7600 (http://www.firearmstalk.com/forums/f33/remington-model-7600-a-77782/)

m1shooter 12-05-2012 03:44 PM

remington model 7600
 
what retains the large(outside) cam pin into the bolt/bolt carrier of a model 7600 pump rifle? thanks
Sorry Duplicate

Sniper03 12-09-2012 09:42 PM

M1

There is a large pin on either side of the carrier that must be removed. Then remove the small pin in the rear that retains the firing pin. Then the bolt can be taken apart and pulled completely out. Do not loose the spacer ring or the firing pin spring. There is also a Gunsmith Video on YouTube somewhere with a guy doing exactly that on the 7600. I saw it a while back while I was doing some research regarding my Remington 740 Semi Auto.

03

Aderondacker 12-27-2012 02:00 AM

If you are asking what keeps the pin from falling out it is the Ejector Port Cover, usually made out of plastic.

Aderondacker


All times are GMT. The time now is 02:42 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.