Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   Question about .4506 reassembly - did I do this right? (http://www.firearmstalk.com/forums/f33/question-about-4506-reassembly-did-i-do-right-36788/)

swipes22 01-11-2011 05:00 PM

Question about .4506 reassembly - did I do this right?
 
I'm a new gun owner -- my father-in-law, a retired police captain -- gave me his old S&W .4506 stainless. Beautiful weapon and, from what I'm reading, it's incredibly durable.

Last night, I took it apart to clean it for the first time. Reassembly was a bit tricky for me -- I had the slide lock forward on me. I was told that this was due to improper placement of the recoil spring. So I took people's advice, banged the rear of the slide gently against the carpet and it came off. I had the same problem a few more times but eventually, I got it back together...I think.

Now, the single action and double action seem to be working as they should, BUT...

1. When the slide is locked back, the guide rod protrudes slightly farther than the barrel. I've seen pics of other firearms with open actions and found this to be the case in one or two other pics but I don't know if it's right for the .4506. Could my recoil spring placement be off...again?

2. I'm not sure if this is as much of a problem -- it was late and I can't remember how much this concerned me but the slide wants to lock every time I pull it back. This was more difficult to accomplish before because of the size of the weapon -- I had to reach around to manipulate the slide lock but now it seems to be catching too easily.

So does anyone have ideas? A novice gun owner wants to know! Thanks!

c3shooter 01-11-2011 09:10 PM

Sounds like you need something to read-

http://stevespages.com/pdf/s&w_pistol.pdf

Try this, see if it helps.

swipes22 01-11-2011 09:37 PM

Thanks, but...
 
Quote:

Originally Posted by c3shooter (Post 420337)
Sounds like you need something to read-

http://stevespages.com/pdf/s&w_pistol.pdf

Try this, see if it helps.

Thanks, c3shooter. I had the guide handy when I was reassembling but the section on recoil spring and guide rod replacement are very vague for a newbie like me, I guess. I keep reading around the forums and elsewhere on the web that there's a right and a wrong way to feed the spring into the slot and that failure to "line it up" right will almost always result in it coming undone and jamming the slide forward. This is where I'm living now, unfortunately. But I don't know which problem it is, or if it's both. Practice makes perfect, I know...I just need a bit more precise direction on the recoil spring placement I think.

Glasshartt 01-14-2011 03:56 AM

How about asking your father in law for some help?

CA357 01-14-2011 04:32 AM

Some wisdom there Glass. ;)

swipes22 01-14-2011 02:40 PM

Thanks guys. Honestly, I haven't asked him for fear of looking too eager or excited about my new hobby. And also, this gun wasn't his service weapon so I don't think he spent much time cleaning it. Before he gave it to me, he had a gunsmith, a former cop buddy, service it. Just thought someone here might have more recent experience with the .4506.


All times are GMT. The time now is 12:21 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.