Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   pin loose on 9422 (http://www.firearmstalk.com/forums/f33/pin-loose-9422-a-89709/)

charr 04-28-2013 03:45 AM

pin loose on 9422
 
Hi I have a 9422 and pin that hold the reciever and barrel together is loose. Except for hammering any suggestion on how to tighten the pin.

danf_fl 04-28-2013 09:02 AM

I cannot get a clear picture of the schematic.

Is it a "roll pin" or solid?

Sometimes a roll pin could work. I would look at the local hardware store (not a home improvement store) and see if they have one. If it needs to be solid, they may be able to help with that, too.

Any pics you could provide?

hiwall 04-28-2013 12:45 PM

Quote:

Except for hammering any suggestion on how to tighten the pin.
Replace pin. Any other suggestion will involve hammering.

charr 04-29-2013 03:41 AM

The pin is smaller on one end. I can only go in one way. I figure that was pressure fitted. Im going to find a shop that has a press.
Now that I have the rifle apart I am giving everything a good cleaning, removing rust and doing touchup rebluing etc. This .22 is used for hunting alot. I have other .22 but alway pick this one to hunt small game with.

hiwall 04-29-2013 03:51 AM

Quote:

Im going to find a shop that has a press.
Whether they have a press or not, they will use a hammer(it is how it is done 99.9% of the time).

danf_fl 04-29-2013 07:24 AM

Use masking tape and a good punch.

JohnJak 04-29-2013 12:47 PM

Which pin?

http://i684.photobucket.com/albums/v...psb9c6eecc.jpg

danf_fl 04-29-2013 01:43 PM

From the description in the OP, I was guessing he was referring to part number 249.


All times are GMT. The time now is 04:12 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.