Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   percussion BlackPowder rifle (http://www.firearmstalk.com/forums/f33/percussion-blackpowder-rifle-71485/)

drboompa 08-31-2012 01:49 AM

percussion BlackPowder rifle
 
2 Attachment(s)
I recently purchased a used CVA Mountain BP rifle. It appears to have been built from a kit due to some sloppy installing of very small screws. One small screw is on the side-lock and has been peened so that the screw slot is no longer visible. Guess I will have to drill it out?????

As well, the double set triggers appear not to be working. Now, I have never had a rifle with double set triggers so I am not sure if I am doing it correctly. I pull back on the hammer to full cock and the rear trigger does nothing. Pulling the forward trigger shoots the gun.

pictures are below

mountainman13 08-31-2012 02:09 AM

There should be a difference in pull weight if you just pull the front trigger it should be longer and harder than if you use the set trigger. If not then you have an issue.

c3shooter 08-31-2012 04:29 AM

With a "set" trigger, you can just pull one trigger (hard) -OR- pull the "setting" triiger, which drops the pull of the OTHER trigger to just a pound or two. When not properly adjusted, does not work.

Depending in size of buggered screw, you can drill, and use an Easy Out (coarse threaded left hand screw)

Be careul- buggered screw slots are a sign that Bubba has been there. Look for indications of other problems as well.

mountainman13 08-31-2012 01:14 PM

1 Attachment(s)
.............

drboompa 08-31-2012 10:31 PM

2 Attachment(s)
Attachment 56308

Attachment 56309

here they are

mountainman13 08-31-2012 10:33 PM

Everything looks fine from what I can see.

kytowboater 08-31-2012 11:26 PM

Quote:

Originally Posted by mountainman13
.............

Stealing this....

mountainman13 08-31-2012 11:38 PM

No its mine. I stole it fair and square damn you.

kytowboater 08-31-2012 11:41 PM

Quote:

Originally Posted by mountainman13
No its mine. I stole it fair and square damn you.

Roshambo you for it, but I go first.

mountainman13 08-31-2012 11:53 PM

Nope.......


All times are GMT. The time now is 07:45 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.