Ouick and easy butt plate.
Firearm & Gun Forum - FireArmsTalk.com > Gunsmithing & Do-It-Yourself Projects > Gunsmithing Forum > Ouick and easy butt plate.

Reply
 
LinkBack Thread Tools Display Modes
Old 07-22-2012, 04:28 PM   #1
Guest
 
Posts: n/a
Default Ouick and easy butt plate.

Being a guy who is rather short in stature, I have had a problem with the length of pull on off the shelf guns as being too long; not, extremely long, but anywhere from 1/4 to 3/4 inch too long, or just long enough to be aggravating. By replacing the original butt plate or recoil pad w/ a 1/8" thick piece of plexiglas shaped and fitted to the gun butt, my problem was solved. The stock does not have to be cut and if I sell the gun, I just put the original plate back on. I spray paint the back side of the plexiglas plate whatever color I want and it is cheap, easy, and does not look too bad. I use a moto tool to do the final fitting. Hey, you might laugh, but it works for me.
cottontop

dscn0034.jpg  
__________________
 
 
Reply With Quote

Join FirearmsTalk.com Today - It's Free!

Are you a firearms enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more.

Firearms Talk is owned and operated by fellow firearms enthusiasts. We strive to offer a non-commercial community to learn and share information.

Join FirearmsTalk.com Today! - Click Here


Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
rubber butt plate collier281 Firearm Accessories & Gear 1 04-25-2012 02:49 AM
I need some help with butt plate ID 207driver Curio & Relic Discussion 11 11-04-2011 11:09 AM
What gun did this butt plate go to? itfchaos General Rifle Discussion 6 11-01-2011 06:18 PM
Looking for a butt plate for a old shotgun michiana Gunsmithing Forum 4 08-19-2009 04:54 PM
Removing Savage Butt Plate roychris Engraving & Refinishing 2 04-24-2009 08:27 PM