Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   Nylon 66 nameplate (http://www.firearmstalk.com/forums/f33/nylon-66-nameplate-66987/)

coryan 06-24-2012 12:08 AM

Nylon 66 nameplate
 
Hi, I have a Nylon 66 clip that some replaced the small round nameplate on the stock with a 77 nameplate. Could anyone tell me the best and safest way to replace the nameplate with a correct 66 nameplate. I have the correct plate, just not sure how to do without tearing up anything.
:confused:

xcoreyyyx 06-24-2012 12:33 AM

By nameplate what do you mean? I have taken apart mine and can link you to a nylon 66 disassembly video. My nylon 66 has a tube mag out the back though. Maybe pictures of what you are talking about and I can guide you in the right direction.

xcoreyyyx 06-24-2012 12:36 AM

Here are 2 links on disassembly of the nylon 66 that I have used in the past. Since you have the clip version of the nylon 66. Make sure to remove the clip before disassembly. Everything else should be the same. It is quite simple to disassemble. I will be happy to help if you need it. PM me if you do.

http://www.nylonrifles.com/Nylonpdf/RemNylon66.pdf

coryan 06-24-2012 10:56 AM

1 Attachment(s)
Thanks for the response. I have attached a picture ( I hope ). It is the bottom rubber plate between butt and trigger. The attached is the way it should look - not with a 77 on the plate.

xcoreyyyx 06-24-2012 10:45 PM

Are you sure that you have a nylon 66? I think you have a nylon 77. From what I have read the both the grip plate and the buttplate are bonded in place from the factory. They were not meant to come off at all. I also read that the inside of it MAY have 2 screws holding it in place from the inside under the whole trigger assembly. Although that is true, I am pretty sure you have a nylon 77. The 66's came with a tube mag where as the 77 comes with a clip. Pictures of the gun itself and how you know its a 66 would help. From what I have read though, I would be almost certain it is a 77.

xcoreyyyx 06-24-2012 10:47 PM

Also, here is a link to all the info you would need to know about that gun. History, disassembly, and little things on the rifle itself.

http://www.nylonrifles.com/wp/2009/01/introductionremingtonnylonrifle/

coryan 06-25-2012 10:19 AM

I am positive it is a 66. I have over 25 of these Nylon rifles. The 77 was a green colored clip sold by K-Mart called an Apache. The one I have with the wrong plate is a Mohawk color 5 round clip that was made before they came out with the 10C. The only ones I am missing in my collection is the high dollar hard to find ones that eventually I will break my piggy bank and someday have the complete collection. Believe me any info out there I have read on these Nylons. Thanks


All times are GMT. The time now is 05:00 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.