Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Gunsmithing Forum (
-   -   Need Help with ejector (

George Tucker 12-06-2009 02:57 AM

Need Help with ejector
I just took a Ruger 77 on trade, it is a 220 Swift heavy Barrel, made in 1976, the Rifle is in excellant condition and the throat and bore look really good, when i looked at the bolt face, the ejector is flush with the bolt face, so it will not eject the case, i drove out the retaining pin to release the ejector and spring, nothing moved, i pushed on the ejector with a pin punch, and can move it up and down a short ways, but it will not come out of the hole, does anyone have a idea on how to get this ejector free from the hole? thanks George Tucker,

Tuner 02-25-2010 03:19 AM

Ruger M77 Ejector
Have you tried removing tghe extractor and tapping on the front of the bolt with a fiber or wood mallet? The inertia might jar the ejector loose and the fiber or wood should not hurt the bolt.

George Tucker 02-25-2010 04:32 AM

Turner, i tried everything i could think of, flooded it with Kroil oil, and all the other methods, finally i was carefull and ended up drilling it out, everything turned out good, thanks for the reply, George.

All times are GMT. The time now is 04:11 PM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.