Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   mossberg 535 mag tube removal (http://www.firearmstalk.com/forums/f33/mossberg-535-mag-tube-removal-77918/)

MAB1271989 12-07-2012 01:22 AM

mossberg 535 mag tube removal
 
I have a Mossberg 535 and the spring inside the mag tube is bad and I have no clue how to remove the tube to replace the spring. I've took the whole gun apart and twisted with no luck. Mossbergs manual wasnt helpful either. Any help would be appreciated! Thanks!

John_Deer 12-07-2012 01:29 AM

You need a special tool to remove the mag tube from a Mossberg. Brownells sells them for around $35 plus shipping. You also need the cap and pins. The total will be around $50. You will likely come out cheaper getting a gunsmith to fix it for you.


Aperez 12-07-2012 07:34 PM

Dude you don't have to unscrew the tube to get access to the spring. When you take off the cap in the front and remove the barrel you will notice in the from of the tube there seems to be a cap that looks like it won't come out because the end is crimped get a large flat heat stick it in that cap and screw in about 1/8 of a turn do that the notch in the cap lines with the crimp in the tube and pops out mind you, you need to do this pushing the cap in a little. Once the cap comes off just pull the spring out and follower. If you feel the spring has lost some tension give it an attitude adjustment and stretch it out a bit to gain more tension. You don't need any special tools. The only reason to take out the mag tube is if it's bent or dented because it can cause feeding or loading issues.

MAB1271989 12-08-2012 11:43 PM

I took the cap off that holds the barrel to the gun. the tip of the mag tube doesn't look like it comes off.I might have to try those pliers..

Aperez 12-09-2012 04:42 AM

Did you try to screw it in a 1/8 inch like I said to line up the crimps with the notches in that cap inside the tube. I know it doesn't look like it comes out but it does.

shooter88 12-09-2012 06:59 AM

Quote:

Originally Posted by Aperez (Post 1043172)
Dude you don't have to unscrew the tube to get access to the spring. When you take off the cap in the front and remove the barrel you will notice in the from of the tube there seems to be a cap that looks like it won't come out because the end is crimped get a large flat heat stick it in that cap and screw in about 1/8 of a turn do that the notch in the cap lines with the crimp in the tube and pops out mind you, you need to do this pushing the cap in a little. Once the cap comes off just pull the spring out and follower. If you feel the spring has lost some tension give it an attitude adjustment and stretch it out a bit to gain more tension. You don't need any special tools. The only reason to take out the mag tube is if it's bent or dented because it can cause feeding or loading issues.

Do they actually make mag tube extensions for mossbergs? I own 2 the 535 and mavrick 88

MAB1271989 12-12-2012 02:44 AM

Yeah, the screw is attached to the barrel. And I can't twist the tube at all. I'll see if I can upload a picture. I'm more visual learner..

srtolly1 12-19-2012 04:37 PM

I recently removed the tune from my 500. Had to pad my bench vice (I used thick leather) and used a strap wrench and worked it back and forth till it loosened. Don't be in a hurry, be patient and it will come.

John_Deer 12-27-2012 10:46 AM

Quote:

Originally Posted by shooter88 (Post 1045082)
Do they actually make mag tube extensions for mossbergs? I own 2 the 535 and mavrick 88

They make magazine extensions for a mossberg but you have to use an aftermarket barrel. Brownells sells the kits. Your gun looks weird with a magazine tube that is a foot longer than the barrel.


All times are GMT. The time now is 07:02 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.