[cgersty]

Anyone have instructions or a schematic on how to put the trigger group ack together? Any help is appreciated.

[orangello]

http://www.gunpartscorp.com/Manufacturers/Mossberg-33399/Shotguns-37443/500-41910/PartsList-34118.htm

Can you make that out; kinda small for my eyes.


http://www.brownells.com/.aspx/pid=0/sid=160/schematicsdetail/500A-12-Gauge
This one is a bit clearer.

You may have to go on youtube & roll the dice.

[cgersty]

Thanks, I'm blind too lol, I will see if I can blow it up and clear it out a little, gives me a place to start.

[srtolly1]

Not the easiest thing to do. Don't do it if you don't have to. Mine was full of grease and gravel so I had to. Have a third hand ready.

[cgersty]

I'm actually restoring.one for a buddy, he has been duck hunting with this gun for last 16 years, it has been under water, in the sand, and had countless shells through it, and he never cleaned it, it SAS rusty, Had to use channel locks to get the barrel nut loose, the trigger was so gritty it wouldn't reset it self, had no choice lol.

[orangello]

http://www.ebay.com/itm/Mossberg-500-12-Gauge-Shotgun-Bolt-Trigger-Group-Pistol-Grip-Misc-parts-kit-/150972164495?pt=LH_DefaultDomain_0&hash=item2326a4 698f

Might be some usable parts there, including what they say is a complete trigger group.

This is a used parts kit for a blued Mossberg 500 .12 gauge shotgun parts kit. This includes the trigger group, bolt, action bars, shell lifter, stock screw, magazine spring, polymer pistol grip and all parts pictured. They are in good condition and fair to good cosmetic condition. I do not have any other parts for this gun.

http://www.ebay.com/sch/220sig10/m.html?item=110994866839&pt=LH_DefaultDomain_0&has h=item19d7cf4297&rt=nc&_trksid=p2047675.l2562 Some other parts listed (mag tube & spring & internals & such).

[srtolly1]

Taking it apart is the easy part. I did find a couple YouTube videos on the subject that helped me but I have been working on firearms for the better part of 20 years. I have a small padded vice that held the housing while I assembled everything.

[cgersty]

Thanks, I am at the point now where I need to step away from it before it gets thrown or broken lol

[Mongo]

The most difficult trigger group to assemble is the Camp 45 carbine. (In my opinion.)

[cgersty]

I'll keep Thatta mind if I ever have one of those tore down, thanks for the heads up.