Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   Mini 14 Hogue Stock fitment issues (http://www.firearmstalk.com/forums/f33/mini-14-hogue-stock-fitment-issues-15304/)

Jon360PD 07-01-2009 01:20 PM

Mini 14 Hogue Stock fitment issues
 
Does anyone else have experience getting a Hogue Stock onto a Mini-14? It wasn't real co-operative, but it's on now. Unfortunately the front of the bolt assembly rubs on the stock a bit, slowing down it's return. Is it normal to need to trim the stock back a bit on the right side to clear the bolt assembly?

M14sRock 07-01-2009 03:17 PM

Quote:

Originally Posted by Jon360PD (Post 123832)
Does anyone else have experience getting a Hogue Stock onto a Mini-14? It wasn't real co-operative, but it's on now. Unfortunately the front of the bolt assembly rubs on the stock a bit, slowing down it's return. Is it normal to need to trim the stock back a bit on the right side to clear the bolt assembly?

Yes, they usually need some trimming. Or, if you have a Dremel you can use the sanding drum and grind away until the fit is right. The Hogue stocks are very good once you get the fit squared away.


All times are GMT. The time now is 01:37 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.