Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   Marlin 50 12ga. variable choke (http://www.firearmstalk.com/forums/f33/marlin-50-12ga-variable-choke-45009/)

fastback4 07-11-2011 12:55 AM

Marlin 50 12ga. variable choke
 
2 Attachment(s)
Is my Marlin shotguns variable choke machined on as part of the barrel or is it pressed onto the barrel?

Attachment 30635

Attachment 30636

hiwall 07-11-2011 02:16 AM

most likely brazed/silver soldered to the barrel

fastback4 07-12-2011 04:46 AM

the choke should come off, correct?
 
So if i apply dry ice concentrated to the barrel near the choke, and heat the choke with map gas the choke should come off, correct?

hiwall 07-12-2011 03:35 PM

I don't know about the dry ice but you might get it hot enough with the map gas to get it off. If you try it have the collar off to keep the mass to a minimum. Most likely it is a tight fit so don't think it will fall off without twisting/pulling after it melts the solder.


All times are GMT. The time now is 01:26 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.