Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   M1 carbine (http://www.firearmstalk.com/forums/f33/m1-carbine-39510/)

CHUCK70 03-09-2011 01:36 AM

M1 carbine
 
I was given a 30 caliber carbine about 25 years ago, it is not an
original it is a national ordnance, it had been in the trunk of a rusty
old car for a long time, I cleaned it up and put it away. Last week
I took it out to shoot for the first time, I also took my alpine 30
carbine, The alpine has always been a good shooter and never
had any problems. The national will not cock the hammer when
a round is fired but it will eject the case and chamber a new
round. Sometime it will fire 2 or 3 rounds like a full auto. When
I work the slide by hand it will chamber a round, eject, and cock the
hammer every time. I took off the trigger housing and it looked
like everything is working like it should. I hope someone out there
can help me because today every firearm is valuable. I'm new here
and dont know my way around this forum yet.

THANKS CHUCK70:)

c3shooter 03-09-2011 03:30 AM

Chuck- first, welcome to the forums. When you get a chance, stop over at the intro page and say howdy.

Second, not to scare you, but get the carbine to a gunsmith. Possible problem with with the gas piston and/or the trigger group. Someone MAY have attempted a "Bubba" gunsmithing of the trigger group. If the carbine is doubling or tripling, and not being held in the cocked position, the hammer is riding the bolt home. You do NOT want to be found with a weapon that is doing burst fire. We would see you on the evening news doing the perp walk.

Sniper03 03-09-2011 02:02 PM

Chuck,

I do not know that much about the M-1 Carbine but know who does. He could also fix the rifle if you would choose.
Here is the contact: Terry Douglas at Hilltop Guns Inc. Colona IL. 309-949-2556. Terry has a collection of M1-Carbines and is a master when it comes to working and history on the M-1 Carbine, M-1 Garand, M1-A, (M-14) AR-15s and other weapons. He was also the Senior Armorer and Armorer Supervisor for a well known AR Manufacturer for years! His skills are unmatched. Thought I would let the other FTF members know about this if they need work on any of the above.

03

CHUCK70 03-09-2011 07:07 PM

M1 carbine
 
THANKS GUYS
I would like to get the parts and fix it myself, but just to be safe
I know a gunsmith that does the same as MR. TERRY DOUGLAS,
he is MARK HARTMAN at JAMES RIVER ARMORY he has done
work for me before and he does restoration of WW2 rifles. How do I
get to the intro page??

THANKS CHUCK70:)


All times are GMT. The time now is 03:20 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.