Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Gunsmithing Forum (
-   -   Lowering Poundage? (

MUSKETeer 05-09-2007 04:03 PM

Lowering Poundage?
I have a Remington 700 SPS in 223 and the trigger is at least 5 pounds. Anyone know if there is any way to lower the poundage? Or is this strictly a gunsmith item? Thanks.

Murray 05-17-2007 04:56 PM

Took a while for someone to show up with an answer for ya, but here goes.

I believe the SPS has the standard 700 trigger and they are fully adjustable. Not something for the inexperienced, though.

A good Gunsmith can remove the factory "glue" adjust screws for engagement and weight and re-glue, but not below 4 lb. But, a clean, crisp 4 lb trigger will seem much better than what it is now. (we get 46 for this)

To get below 4 lb requires an aftermarket replacement trigger assy. Timney, Rifle Basix, and I believe Shilen still offer replacement assy's. These are offered in models that go as low as 4 ounces. Whew, (for benchrest only)!

Hope this helps.

robocop10mm 07-03-2007 06:28 PM

lowering poundage
Go to They have detailed instructions on doing this. follow the instructions to the letter and you will have no problems.

jeepcreep927 03-12-2008 04:32 AM

Adjustment of the backlash and weight is fairly simple, but I wouldn't mess around with sear engagement. And the glue is there for a reason, if you touch the trigger adjustments it voids your warranty. On ANY part of the rifle. Just fyi.

Dillinger 03-20-2008 07:49 PM

Triggers are always the first....
I've probably worked on 100+ rifles during my time apprenticing in a local gun shop and triggers are always the first thing to be modified, the problem is, everyone has a different standard as to what they think is "right". It's purely subjective to the shooter.

Benchrest guys want about 3 to 4 OUNCES of pressure - that takes skill and precision that I do not have - and always is recommended to go with an aftermarket trigger in our shop.

SWAT and Tac teams want about 2 pounds on their triggers, which can be done on a factory trigger, but why? You can drop in a custom, three lever trigger from Timney or Jewell?

With the Remington 700 - you literally have the single largest platform for custom parts of any rifle out there. Anything you could want to customize, someone has already developed right for your action, and there are probably 10 people in line behind him to "modify" his design. It's the single largest selling, most predominant action out there for boltguns. So, if you can afford it, why not let the experts hook you up?

Here is a link to a drop in for Remington 700 models from Timney that I like, plus you can spec the pull weight when ordering, relieving some of the "tension" of doing it yourself. :cool:

All times are GMT. The time now is 11:01 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.