Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Gunsmithing Forum (
-   -   Help Winchester 1892 44 wcf (

aco_daskalot 02-04-2012 04:05 PM

Help Winchester 1892 44 wcf
5 Attachment(s)
Hi to everyone, I have a Winchester 1892 44 WCF but I don't have all the parts. The only parts I do have is shown on the forwarded pictures.Please help me or advise me where and how can I find them for purchase

Minionsram 02-04-2012 04:17 PM

It looks to be striped down perty good. You will have to make and or have a good gunsmith make a few of them I am sure. I am not real sure if it makes a diffrence but that firearm is listed as US made and Japan made with 2 diffrent schematics, dont know what one you have for sure. Also it helps to call the first link and talk to them because some of the parts may not be listed or they can help you more, after you figure out what all you need. Now keep in mind that a machinist can make some of the pins and so can a gunsmith, but it may cost you. Fixing this rifle up to shooter status may cost more than its worth. Run your numbers if you are worried about that, if not have fun on the rebuild.|Make~~Model_1=Winchester__1892/Products/Rifle-Parts

aco_daskalot 02-04-2012 07:25 PM

Thenk you for the links that you sent to me,the pins I olready made.On the barrel is written " manufactured by the winchester repeating arms co.New haven conn.U.S.A patented octobrr 14.1884 44 WCF. On the end of the mechanism part where the gunstock is attached is written "model 1892 -WINCHESTER- trade mark USA

Trez 02-04-2012 10:21 PM

Heres the site I used to fix up my Winchester 1895... They specialize in old Winchester parts.. 97595.5397

If its a original it will be a US made one, The ones from Japan are the modern reproductions.

All times are GMT. The time now is 09:55 PM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.