H&K MP5 Sub-Machine Gun Final 5 Test Quiz Questions


Firearm & Gun Forum - FireArmsTalk.com > Gunsmithing & Do-It-Yourself Projects > Gunsmithing Forum > H&K MP5 Sub-Machine Gun Final 5 Test Quiz Questions

Reply
 
LinkBack Thread Tools Display Modes
Old 06-02-2012, 06:26 PM   #1
Feedback Score: 0 reviews
 
Join Date: May 2012
Location: Lewisville,TX
Posts: 6
Default H&K MP5 Sub-Machine Gun Final 5 Test Quiz Questions

H&K MP5 Sub-Machine Gun Final 5 Test Quiz Questions

I am semi-retired and I am taking a self-passed and self-taught Armorers course and now I am on the H&K MP5 Sub-Machine Guns I hope to become a part-time light Gunsmith in the future.

There are over 60 quiz questions covering this firearm and I have answered most of them but during my study and research I am having some problems related to some of the following quiz questions. Either I am not sure of the correct answer or I have conflicting answers.

Can you help me determine the correct answers for these few 5 quiz questions?

Thanks for your help.

Note #40. One front pin secures the trigger pack into the receiver. True or False.
a) True
b) False

Note #41. The small angled portion of the magazine follower goes toward ...
a) The back of the magazine
b) The front of the magazine

Note #42. When putting a stop latch back into one of the smaller three position trigger packs, the spring is positioned so that
a) The short leg rests on the shelf in the trigger housing and the long leg rests on the rear of the inner trigger housing, though this is not the final position of the springs legs in working position.
b) The long leg rests on the shelf in the trigger housing and the short leg rests on the rear of the inner trigger housing, though this is not the final position of the springs legs in working position.

Note #43. What part makes it especially difficult to get the counting wheel back in the trigger housing?
a) the trigger
b) the hammer
c) the compression rod
d) the selector catch lever

Note #44. On the smaller trigger packs, the installation of what part can be greatly simplified with a special tool?
a) The trigger
b) The hammer spring/main spring
c) The contact piece
d) The ratchet
e) The elbow spring


__________________
hoppy70 is offline  
 
Reply With Quote

Join FirearmsTalk.com Today - It's Free!

Are you a firearms enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more.

Firearms Talk is owned and operated by fellow firearms enthusiasts. We strive to offer a non-commercial community to learn and share information.

Join FirearmsTalk.com Today! - Click Here


Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
Springfield Armory XD/XDM Pistols Test Quiz Questions Hoppy74 XD Forum 4 06-06-2012 12:44 PM
SA XD/XDM Pistol 6 Final Test Quiz Questions hoppy70 Gunsmithing Forum 1 06-05-2012 12:01 PM
H&K MP5 Sub-Machine Gun Test Quiz Questions hoppy70 Gunsmithing Forum 1 06-02-2012 08:18 PM
Springfield Armory XD/XDM Pistols Test Quiz Questions hoppy70 Gunsmithing Forum 1 05-29-2012 01:06 AM
Mossberg 500 Shotguns - Final 5 Quiz Questions! Hoppy74 General Shotgun Discussion 8 05-21-2012 04:41 AM