Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   Glenfield Model 60 (http://www.firearmstalk.com/forums/f33/glenfield-model-60-a-18512/)

Handyman 09-25-2009 02:07 PM

Glenfield Model 60
 
I had a buffer break, when I took it apart to replace it the Ejector Lift Spring fell out. I know where it goes but for the life of me I cannot figure out where the 2 ends of the spring seat to make it work properly. I have taken it apart numerous times and tried it in different places but the gun will not bring the shells up into the chamber. Any help would be appreaciated.

JoshRushing 09-27-2009 02:55 PM

For starters the long side of the spring rests on the back of the feed throat and may or may not act as the ejector depending on with version you have. The shorter side with a bend rests under the cartridge lifter.

post pics of assmembled unit for futher instruction......

agoetz2005 11-10-2009 12:18 PM

That, and check the marlin Website for the manual with exploded view.


All times are GMT. The time now is 10:53 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.