Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   Free float 10/22 (http://www.firearmstalk.com/forums/f33/free-float-10-22-a-27041/)

Fisherking 05-11-2010 07:05 PM

Free float 10/22
 
I was wondering what it takes to free float a 10/22 barrel do you use a difrent V block. How do they do it for the bull barrels.
Thanks F.K.

jeepcreep927 05-11-2010 08:43 PM

Ruger 10/22 Bedding Experimentation

This is *sort of* how I did mine, however I pinned the receiver to the stock at the rear trigger group per instructions available on rimfirecentral.com.

The receiver is is absolutely rock solid in the stock this way. There are few other, more complicated ways like adding a partial barrel sleeve, but I wanted something that didn't require machining parts. Only thing about pinning the receiver is that you have to drill out the hole or holes, depending if you use both to pin through, in the receiver and trigger group.

Good luck.

jeepcreep927 05-11-2010 08:52 PM

Receiving anchors:
Anchored Receiver - RimfireCentral.com Forums

Sorry, forgot that first time around...


All times are GMT. The time now is 05:23 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.