Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   Do I need a Gunsmith Certification to get my FFL? (http://www.firearmstalk.com/forums/f33/do-i-need-gunsmith-certification-get-my-ffl-90726/)

GSmith1883 05-15-2013 04:49 AM

Do I need a Gunsmith Certification to get my FFL?
 
I went to The Colorado School Of Trades for Gunsmithing. Its a fourteen month course, four to five days a week, eight hours a day. In my thirteenth month there I was dropped from the program due to attendance, blowing my opportunity for my certification. I missed too many hours due to family and financial issues. I passed all the courses (basic tooling, cycle of operations, welding, machine shop, stocks, and R&D), the only thing i missed was my final project and the final written test. Any yes I am furious with myself, but whats done is done.
I have been doing work for family, friends, and friends of friends for two years now doing repairs, stock refinishes, pillar bedding, trigger jobs, sights and scopes, and cleanings. But I am getting to the point that I am running out of jobs unless I start handing out business cards and taking jobs from people I dont know, which I think I need a FFL to do so.
So can I get my FFL without my Gunsmith Certification?
And even if I can I still want the Certification, so are any of these online Gunsmith Program Certifications worth the time and money? this is one I found online http://www.becomeagunsmith.com
And finally I found this site http://www.gunsmithffl.com , is a FFL "kit" worth the money?
Sorry for the lengthy post, any advice would be greatly appreciated.

AR10 05-15-2013 05:25 AM

If you are engaged in the business of gunsmithing and you house other peoples guns over night, or a series of nights, days, weeks, months, years, while you work on them, you are currently in violation of the federal gun laws pertaining to gun dealers.

You need an FFL as a gunsmith.

Now, I would send those guns, to their owners yesterday, and get your horse in front of the cart, before you go to federal prison doing time for gun crimes.

c3shooter 05-15-2013 09:48 AM

What he said up there ^^^. And there is no requirement to have a cert from a gunsmithing school to get a FFL.

danf_fl 05-15-2013 10:12 AM

Quote:

Originally Posted by GSmith1883 (Post 1247306)
And even if I can I still want the Certification, so are any of these online Gunsmith Program Certifications worth the time and money? this is one I found online http://www.becomeagunsmith.com
And finally I found this site http://www.gunsmithffl.com , is a FFL "kit" worth the money?
Sorry for the lengthy post, any advice would be greatly appreciated.

They do assist in getting your FFL, but why not get most of the same information directly from the BATF?

They can and will answer your questions without charging additional fees.

If you get the kit, you have to lay out money for the kit and the license. By using the BATF, you only lay out for the license.

mountainman13 05-15-2013 12:23 PM

Other than information the online courses are useless. As stated above go through the atf and check your state and local laws and ordinances to gaurantee compliance before you apply for the ffl.
Your skill level is already well beyond anything the online courses can give you short of maybe a bit more info on the ffl application process.

GSmith1883 05-15-2013 03:40 PM

Ok, I will contact the BATF today.
I definitely do not want to violate any laws, I do not currently have anybody else's firearms in my possession for that reason. As soon as I started reading about the laws on working on other people's firearms and storing them I closed up shop. I never considered I was violating any laws because all the jobs I've done were favors for friends. I only accepted money for two jobs to cover the materials. So until I have my FFL I am done.
Thank you for the advice.

danf_fl 05-15-2013 05:03 PM

The problem I've had working on friends and relatives guns is that everyone thinks they should get a "break" on parts cost and free labor.

GSmith1883 05-16-2013 01:22 AM

I don't mind doing the work for friends and family for free because most of them were the ones that sparked my interest in firearms to begin with. I have a full time and part time job that pays the bills, so most of the work I did was a hobby and something I enjoy doing. Unfortunately once I get going again, I'm afraid they will keep expecting the free labor.

GSmith1883 05-16-2013 01:28 AM

I contacted the BATFE Denver office, they are mailing the FFL application packet to me.


All times are GMT. The time now is 04:45 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.