Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Gunsmithing Forum (
-   -   Ak trigger upgrade installation? (

randall51286 07-30-2010 01:09 AM

Ak trigger upgrade installation?
Hey guys I'm new to the forum I just purchased a Tapco G2 Trigger assembly for my psl and was wondering how to install it. It says that its a drop in assembly but i know it has to be more complicated than that. Has anybody attempted this yet? Please help

stalkingbear 07-30-2010 02:51 PM

It is basically a drop in installation. You can do a search on youtube for a video guide on how to do it.

randall51286 07-30-2010 03:38 PM

Thanks stalkingbear I really do appreciate it. I don't know why I didn't check there first but I think that is a better option than trying to read an instruction manual. Once again thanks.


7.62 Man 08-02-2010 11:45 PM

Here are a few videos for the AK type FCG, the PSL will be about the same.;)

progun3400 10-29-2010 04:30 AM

There are a few ways. I do it just like the fellow shows in the link below but as he mentioned in the video, if one of the ends of the hammer spring comes loose from behind the hammer, it could tear you up pretty good. After I hook the ends behind the hammer as he demostrates, I take a garbage bag tie wire and tie it around the hammer and spring ends to help prevent from getting bitten.

Gunfan--actic 10-29-2010 09:10 PM

Great info guys, I,m installing the same trigger in my tricked out Romanian AK. Thanks x2

All times are GMT. The time now is 06:20 AM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.