Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   6.8 Reminton SPC Barrel (http://www.firearmstalk.com/forums/f33/6-8-reminton-spc-barrel-2054/)

EHCRain10 09-27-2007 06:14 PM

6.8 Reminton SPC Barrel
 
I would like to convert a bolt action rifle to chamber the 6.8 SPC.
I know that any action long enough to work with 223 remington will work with the 6.8 because the rounds are the same length.

I will most likely buy a used rifle to start the project with but my question is what model rifle would be the easiest to find a barrel for? (unless someone knows of a company making new rifles in 6.8)

matt g 09-28-2007 12:56 AM

Look at the other thread about the 6.8 Rem. I'd start with a .270 Rem Remington 700 and order a 6.8 Rem barrel from Krieger Barrels and have them fit their barrel to the .270 Rem receiver.

It wouldn't really be worth it though. You're talking about quite a bit of money for a rifle that uses a novelty round. The 6.8 Rem is only good out to about 300 yards.

reyflete 03-28-2008 06:21 AM

6.8 spc
 
go with a .223 savage 10 and have the bolt face opened up to accomidate the 6.8 spc round you can get a barrel barrel blank from shillen and have mark skaggs www.skaggsgunsmithing.com to turn and barrel it for you he has done a couple rifles for me and all have shot less than minute of angle:)


All times are GMT. The time now is 08:04 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.