.22 Pistol reliability improvement - Page 2
Firearm & Gun Forum - FireArmsTalk.com > Gunsmithing & Do-It-Yourself Projects > Gunsmithing Forum > .22 Pistol reliability improvement

Reply
 
LinkBack Thread Tools Display Modes
Old 12-15-2012, 02:39 PM   #11
JTJ
FTF_SUPPORTER.png
Feedback Score: 0 reviews
 
JTJ's Avatar
 
Join Date: Oct 2010
Location: Lake Havasu,Arizona
Posts: 6,110
Liked 1992 Times on 1080 Posts
Likes Given: 593

Default

It sounds like you are using Remington Cyclones which are a 36 grain HV HP. Try a different brand or stick with solids. Hollow points dont work that well in short barrels anyway. Not enough velocity to properly expand. I have good luck with Federal 525 bulk packs which are similar to your Cyclones for cheap shooting. Check your magazines to see if they are clean and the follower is not sticking. Also make sure the magazines are seating properly.

__________________

Patron Member NRA
"I would not be an old man if I had not been an armed young man." JTJ
"Political correctness is a doctrine, fostered by a delusional, illogical minority, and promoted by mainstream media, which holds forth the proposition that it is entirely possible to pick up a piece of feces by the clean end."

JTJ is online now  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
XDm reliability Sonic82 Semi-Auto Handguns 20 09-23-2012 07:03 PM
AR vs. AK Reliability PeteZaHut Auto & Semi-Auto Discussion 22 05-29-2012 10:39 AM
STI Reliability jmac2387 Semi-Auto Handguns 13 03-29-2012 10:03 PM
AR reliability blucoondawg AR-15 Discussion 27 03-10-2012 04:27 PM