Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Gunsmithing Forum (http://www.firearmstalk.com/forums/f33/)
-   -   1911 conversion: 45 to 10mm (http://www.firearmstalk.com/forums/f33/1911-conversion-45-10mm-17793/)

1006smith 09-07-2009 08:37 PM

1911 conversion: 45 to 10mm
 
I am wanting to hear opinions and actual real-world successes and failures on this.

I presently own a S/A 1911 in 45acp and I am wanting to obtain a 10mm slide and barrel assembly. I aready have other parts for this. I have heard the ramp angle is different for these two calibers.

My questions are: 1. is the ramp angle actually different; and, if it is, 2. would that cause relibility problems?

I would hate to waste time and money if it won't work. 400 corbon ammo nose dives into the ramp on this gun with a full magazine.

Chuck

stalkingbear 09-08-2009 10:31 PM

It should work just fine if you replace everything you listed PLUS ejector & magazines.

user4 09-09-2009 02:02 AM

Looks like someone else is lamenting not being able to buy a Delta Elite back in the day.

1006smith 09-09-2009 08:42 PM

I had too many chances to count. Had one for $500.00 and thought it too high at the time. Talk about shooting yourself in the foot!!


All times are GMT. The time now is 08:37 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.