Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Other Weapons (http://www.firearmstalk.com/forums/f32/)
-   -   Protecting Blades? (http://www.firearmstalk.com/forums/f32/protecting-blades-449/)

gatgurl 05-17-2007 05:07 PM

Protecting Blades?
 
What do you use to protect your blades?

Wolf 07-09-2007 03:55 AM

Just from the elements? Tuff Cloth.

EHCRain10 02-13-2008 12:26 AM

weekly sharpening and frequent use keeps them rust free for me

bkt 02-13-2008 12:57 AM

Long term storage gets a heavy coat of oil and wrapped in plastic. Frequently used blades are cleaned and sharpened weekly. I use a dry bike chain lube on the pivot and on the blade itself. Oil attracts pocket lint and dirt. The dry chain lube doesn't.

Blades with higher carbon content and lower chrome content may need to be worked with a fine steel wool fairly often to remove any light oxidation.

marysdad 02-16-2008 12:22 AM

The amount of protection required will vary considerably, depending on the environment. What part of the country are you in? Microcrystaline Wax is a good choice for collectable blades that aren't used a lot. It works well on just about any material (metal, wood, plastic, etc.).

matt g 02-16-2008 06:06 AM

You can get cans of spray silicone lubricant that is clear and creates an almost dry film. It keeps rust at bay and lubricates without being oily.

TMCXJ 02-20-2008 07:20 PM

Ballistol goes on every gun, blade, fishing equipment. Non-petroleum. My uncle had been using it since he was a kid back in the 1920's. I've been using it since the 60's. The unique odor takes a bit of getting used to, but the results are more than worth it for me. As for muzzleloaders, nothing else is even a close 2nd as far as I'm concerned.

But as for the question asked by Wolf -- did you actually mean this type of protection, or were you referring to protecting the edge during transport, use, and carry?

Dgunsmith 02-21-2008 02:46 AM

If the handles can be removed, send it to Rocky Mountain Arms and have it bearcoated. Game blood wont even touch the finish and it will not rust .

www.bearcoat.com or 800-375-0846 talk with Phil about knife blades.


All times are GMT. The time now is 12:55 PM.

Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.