Wrong primer now what?? - Page 3
Firearm & Gun Forum - FireArmsTalk.com > Gear & Accessories > Ammunition & Reloading > Wrong primer now what??

Reply
 
LinkBack Thread Tools Display Modes
Old 02-12-2014, 10:30 PM   #21
Retired
FTF_SUPPORTER.png
Feedback Score: 0 reviews
 
danf_fl's Avatar
 
Join Date: Apr 2010
Location: LA (Lower Alabama),FL
Posts: 10,585
Liked 3113 Times on 1788 Posts
Likes Given: 1325

Default

Remove bullet and powder.
Now take a sheet of paraffin wax and form wad cutter bullets from wax.

Practice your fast draw with the single shot 1911.

__________________

Amendment II:
"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."

Life Member NRA
Life Member NAHC
Former President of the ECPT (Eifel Combat Pistol Team)

danf_fl is offline  
 
Reply With Quote
Old 02-13-2014, 03:51 AM   #22
FTF_SUPPORTER.png
Feedback Score: 0 reviews
 
rockratt's Avatar
 
Join Date: Feb 2013
Location: Arkansas
Posts: 1,935
Liked 1844 Times on 805 Posts
Likes Given: 1383

Default

X 10 or somewhere in that neighborhood on pulling bullets and powder. My experience with removing primers over the years have been futile at best. There not worth it....

__________________
Never argue with an idiot. They'll drag you down to there level and beat you with experience!!!!!!!OllllllO
rockratt is offline  
 
Reply With Quote
Old 02-13-2014, 05:15 PM   #23
Feedback Score: 0 reviews
 
clr8ter's Avatar
 
Join Date: Jan 2011
Location: South Central NH
Posts: 3,601
Liked 1127 Times on 748 Posts
Likes Given: 740

Default

Are you sure they don't alter the 9 & 10mm guns to handle the added pressure?

I will admit that sticking some wax in there and shooting them sounds like fun...

__________________

Last edited by clr8ter; 02-13-2014 at 05:46 PM.
clr8ter is offline  
 
Reply With Quote
Old 02-13-2014, 05:35 PM   #24
Feedback Score: 0 reviews
 
Join Date: Dec 2010
Location: Lima,Ohio
Posts: 3,098
Liked 2776 Times on 1250 Posts
Likes Given: 2665

Default

Anybody who has ever reloaded with an old lee loader has had a primer go off while priming. It makes you jump and stings your fingers a bit. It's no big deal. Sure if a stack of 100 primers goes off it's pretty impressive but a single primer going off is nothing. I've de capped over a thousand live primers and never had one go off.

__________________

Last edited by rjd3282; 02-14-2014 at 04:42 AM.
rjd3282 is offline  
Kdub Likes This 
Reply With Quote
Old 02-14-2014, 04:04 AM   #25
Feedback Score: 0 reviews
 
Missouribound's Avatar
 
Join Date: Mar 2009
Posts: 778
Liked 268 Times on 196 Posts
Likes Given: 54

Default

If this is a vote...I vote for dis-assembly of the bullet and charge...then firing the primers. "In my opinion" I would rather lose the $$$ spent on the primers than take the chance of one going off unintended. What good is a lesson learned if it doesn't cost you anything? I do like the paraffin idea though...buy some balloons.

__________________

Never waste time deciding between two guns....buy both of them.

Missouribound is offline  
 
Reply With Quote
Old 02-14-2014, 04:13 AM   #26
FTF_SUPPORTER.png
Feedback Score: 0 reviews
 
Steel_Talon's Avatar
 
Join Date: Aug 2012
Location: Cochise County,AZ
Posts: 1,766
Liked 990 Times on 653 Posts
Likes Given: 1274

Default

This is what "I" do and has worked for "ME" when it comes to removing primers. I deprime live primers as I do spent primers on my single stage press I go slow once I make contact then I apply pressure. I wear my glasses, and wear my gloves, go one at a time and never allow messy housekeeping to occur while in the process no powder or collected primers near by.. . I do not mess with oil etc. to make them inert.

This has allowed me to salvage these primers for correct loading later.

It does seem counter productive, but its the same process of priming cases ie. Direct constant pressure. It's a strike that sets off the primer.

ST~

__________________
'Steel cuts flesh / steel cuts bone / steel does not cut steel.'

Become steel or get cut.
Steel_Talon is offline  
 
Reply With Quote
Old 02-14-2014, 06:56 AM   #27
Feedback Score: 0 reviews
 
Hookeye's Avatar
 
Join Date: Dec 2011
Posts: 955
Liked 309 Times on 204 Posts
Likes Given: 24

Default

Quote:
Originally Posted by jebsca View Post
Keep in mind, some ammo by design is powered only by the primer, and no powder. Still, you should be careful to only point it at something you intend to destroy. With that in mind, a primed case going off in close quarters to your face and hands is asking for trouble. After I asked myself if that 3.5 cent primer was worth the risk, I quit trying to pull them.

With that said, if I am pulling bullets, I do not soak them first, cause I would like to save the primer and powder, as well as the bullet and case.


Sent from my smart phone using my not smart hand.
Reloading for 30+ yrs, maybe I'm doing it wrong, since I stand or sit by my press and my face is a fair distance from the ram.

I don't salvage primers, just knock them out to get them out.
Shooting primer errors and then putting 'em in the press is just an extra step.
The free rounds I got............pulled bullets, dumped powder and ran 'em through the die to prep them for new primers. Again, no big deal.
I have yet to mess up my loads, but on occasion get brass that's primed, or rounds to take apart from others -case salvage a "yes"


Primer only cases fired in a revolver can have the primers back out a bit (not enough oomph to reseat them against the recoil shield). Funny story how I learned that (629 Smith, a mad scramble after a POS cat......).
__________________

Last edited by Hookeye; 02-14-2014 at 01:13 PM.
Hookeye is offline  
rjd3282 Likes This 
Reply With Quote
Old 02-14-2014, 07:21 AM   #28
Feedback Score: 0 reviews
 
Join Date: Jul 2008
Location: selah,washington
Posts: 16
Liked 5 Times on 5 Posts

Default

I would never salvage primers I have had very few misfire and am sure it couldn't be my fault (maybe ) why take a chance I know primers are a bit hard to find but I think it is asking for duds.

__________________
argie1891 is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
This primer... No, that one... enfield1 Ammunition & Reloading 8 01-10-2014 08:03 PM
What is the best tool to put on a primer Sparrowe Blackpowder & Musket 5 07-08-2013 01:58 PM
Primer ???s aandabooks Ammunition & Reloading 8 02-07-2013 12:33 AM
What primer to use? barmanvarn Ammunition & Reloading 16 01-17-2013 05:38 PM
45 acp small primer ellwood45c Ammunition & Reloading 6 04-25-2012 04:51 PM